What PSI should my tyres be?

Achieving the correct PSI of car tyres is an essential part of car management. PSI stands for pounds per square inch. This is the standardised unit of measurement for tire pressure. It ensures that your vehicle is operating in peak condition, without encountering unnecessary wear and tear.

In fact, there are many significant benefits to maintaining the correct PSI for your tyres. For instance, these include:

● Keeping the vehicle’s steering accurate and reliable
● Ensuring your vehicle is consistent with health and safety standards
● Retaining the optimum gas mileage
● Giving your vehicle sturdy and accurate handling
● Your tyres are sitting evenly, so they are not being worn down too quickly, or are needing to be replaced more regularly than they should be

So, as you can see, it’s well worth regularly checking your vehicle’s PSI. Each vehicle has its own specific PSI, and you should not inflate the tyres too far below or above that point.

Typically, a standard car will have a PSI of between 32-35 for a cold tyre.

You can find the specific PSI for your tyres by consulting the driver’s door (where the information will be listed on a sticker). Or, if it’s not listed there, the information can be found in the vehicle manual.

It is important that you measure your tyre’s PSI when it is cold. This is because it will give you a consistent reading, without heat compromising the accuracy of the reading. We would recommend that you check the PSI after your car has been stationary for at least 3 hours.

Another key point to remember is that you don’t inflate a tyre to the PSI unit that you may see detailed on the car tyre itself. You may at first think that this is the recommended pressure, but actually it’s the maximum air pressure that it can withstand. Filling up the tyre to that amount could cause significant and permanent damage to the tyre.

If you have any further questions about how to keep your tyres in premium condition, ensuring they last for as long as they should, our expert team is on hand to help – don’t hesitate to get in touch.